Introduction
This guide demonstrates the Lock Out Tag Out (LOTO) procedure for the John Deere 844K-III Aggregate Handler.
-
-
Move the machine to a safe area.
-
The area must be flat.
-
Make sure the bucket (or forks) are lowered.
-
Level the bucket (or forks) to the ground.
-
-
-
Apply parking brake
-
Turn off Lights
-
Remove seat belt.
-
-
-
Use all four points of contact when exiting the cab.
-
Both hands on handrails.
-
Both feet on steps.
-
Apply wheel chocks.
-
-
-
Move the battery switch to the disconnect position.
-
Lock out the battery disconnect.
-
-
-
Attempt to start the vehicle with the ignition switch.
-
Motor Should NOT Start.
-
If motor starts, return to Step 4.
-
-
-
Wrap the lockout cable from the door handle to the hand-rail.
-
-
-
Sign the Job Hazard Analysis (JHA) Form.
-
Attach the JHA and a Warning Notice to the machine.
-
Lock the JHA & Warning notice.
-
-
-
Put all three lockout keys and ignition key (if applicable) into safe storage.
-
-
-
Use safety cones to mark a perimeter around the machine.
-
-
-
Ensure a perimeter is set from 10' front to back of the machine.
-
-
-
Perform the Circle of Safety
-
Ensure wheel chocks are secure
-
Ensure all locks are secure
-
Ensure battery is disconnected
-
The machine is now safely Locked Out and Tagged Out.
-
-
-
Dozuki can help improve your:
-
-
-
-
-
Get an overview on all of the benefits Dozuki offers: Dozuki Features Review
-
Cancel: I did not complete this guide.
One other person completed this guide.
Team
